Menghapus password bios

Satellite P100 & Satellite Pro P100

Notebook dalam keadaan mati :

• Buka tutup Wi-Fi
  
• Lepas Mini Card Wi-Fi
  
• Cari dan konsletkan JP8 selama 5 detik
• Lepas konsletan dan nyalakan
• NO BOOT
• Tekan dan tahan tombol Power sampai mati lagi
  
• Nyalakan lagi dan password hilang
  

Satellite L10, L20, L30 & Satellite Pro L20

Notebook keadaan mati;

• Buka penutup Wi-Fi
  
• Cari dan konsletkan JP1 selama 15 detik
(Satellite L10)
• Satellite L20/Pro L20 konsletkan G1

Satellite M100 & Tecra A6

Notebook dalam keadaan mati ;

• Buka penutup Memory
  
• Lepas Memory
• Lepas plastik hitam
  
• Cari konsletkan CMOS CLR1 selama 15 detik

Satellite: 17xx Series, 1000, 1110,1130, 1200, 1900, 2430, 3000 P20,P30, P33, A30, A70, A80, M40X, M50,M60, M70, M100

Tecra A3/S2, A5, A6

• Posisi jumper selalu berada di bawah atau dekat dengan module memory
  
• Label dari jumper biasanya J1, J2, J5, J7, J9 or CMOS CLR1 (M100 & A6)

Satellite A100 & Tecra A7

1. Lepas penutup Strip
   
2. Remove 2 x K/B screws
3. Move K/B Unit up but don’t disconnect
4. Release & Remove Mini Card Wi-Fi Card
5. Locate & short C88 Pin 1 & 2 together
6. Power on Machine while still shorting Pin 1 & 2
7. As soon as the TOSHIBA logo appears, remove short
8. If machine boots, Password has been removed

Satellite A100 (PSAA2A-02C01N)

1. Remove Memory Cover from base of machine
2. Release & remove right side Memory Module
3. Lift black plastic insulation
4. Locate & short PAD500 Pin 1 & 2 together
5. Power on machine while still shorting Pin 1 & 2
6. As soon as the TOSHIBA logo appears, remove short
7. If machine boots, password has been removed

TECRA A4 & Satellite M40

1. Open modem & Wi-Fi card cover
2. Remove mini PCI Wi-Fi card
3. Lift up black plastic
4. Locate & short C738 Pin 1 & 2 together
5. Power on machine while still shorting Pin 1 & 2
6. As soon as the TOSHIBA logo appears, remove short
7. If machine boots, password has been removed

TECRA S1

1. Open palm rest cover
2. Remove mini PCI Wi-Fi card
3. Lift up black plastic
4. Locate & short C5071 Pin 1 & 2 together
5. Power on machine while still shorting Pin 1 & 2
6. As soon as the TOSHIBA logo appears, remove short
7. If machine boots, password has been removed

TE 2300

1. Remove 2 x B12 screws from bottom of system
2. Remove strip cover
3. Remove keyboard screws 1 x B2.5 & 1 x SF4
4. Remove 1 x 4mm screw & Wi-Fi cover
5. Remove mini PCI Wi-Fi card if fitted
6. Locate & short points as shown in picture below
7. Power on machine while still shorting points
8. Short for 5 seconds
9. Nothing will appear on the screen
10. Turn system off holding down power button
11. Password is now removed




Satellite A60
1. Open Wi-Fi slot cover
2. Lift up black plastic
3. Locate & short C561 Pin 1 & 2 together
4. Power on machine while still shorting Pin 1 & 2
5. As soon as the TOSHIBA logo appears, remove short
6. 
   
7. If machine boots, password has been removed

If you need your Toshiba bios password removed and your model is not listed above then chances are it's a procedure that can only be done at an authorised repair centre.